Stones, leaves, street grime and hair can get caught on the lawn over time, increasing the risk of slips and accidents. Damping performance to avoid injury also deteriorates. Maintenance of artificial turf after installation ensures cleanliness, like massaging bristles. As with the grain of the leather with a brush, the bristles should be against the grain. Importantly, a fixed grid for the main brush is possible. As a result, the contact pressure is continuously reduced and not too much pressure is applied at any point.

If you've gone through the process of installing artificial turf yourself, here are some tips to protect your lawn as well. For example, the side broom is placed horizontally and can only be used at the edges, as it can only be there to clean and pick up leaves or stones. It would rather put pressure on the lawn itself. The surface can then be treated row by row with the side brush raised. Due to the high speed rotation of the main brush, it must not run in place and the steering wheel of the riding machine must not be turned while standing.

Finally, a very important aspect is the maintenance of the entire system. For example, if the outside areas are regularly removed of loose dirt such as leaves, gum, paper, sidewalks and parking spaces will be clean, and the amount of dirt on a playground artificial turf will be significantly reduced. Thanks to the wet sweeping function, the sweeper can also be used in bad weather. Usually a surface cleaner with a working width of 30 to 50 cm is used. This enables large-area coverage and can largely eliminate the need for cleaning agents. Because the impact force and corresponding water volume from the high-pressure powered nozzles are usually sufficient for cleaning. The waste water then enters the sewage system through a drain. To further reduce working time, equipment bays with rotating beams are available for large railways.

Especially the maintenance of unfilled fields where artificial grass is laid in the cheapest way can be easily guaranteed with little investment and combined with the maintenance of the whole system so that sports can be fun in the long run . After the artificial turf installation company has cleaned the artificial turf, the sweeper should be serviced. The filter must be cleaned using the cleaning mechanism provided, and then the falling dust is collected in the dust collector. The container can then be removed and emptied. The lint filter can be cleaned with a hand broom or vacuum cleaner. Roller brushes and side brushes should be inspected for wrapping tape or film that needs to be removed. Dirt on the side brushes can also be removed with a hand brush.

When you choose Udine grades, you will work with a company with a good quality record and more than 20 years of manufacturing innovation. We are proud to support the quality control of every grass product.